Add to Cart
Security Ticket In Ticket Out Flap Barrier Gate For Pedestrian Access Control
Fujica Product Description:
1. Be compatiable with a variety of Mifare/RFID card readers, for various cards,etc.
2. Be compatiable with other pedestrian barriers in one same system.
3. Alarm at unauthorized entry, tailing attempts & reverse pass, together with anti-clamping
function to protect pedestrian, equipped with several couples of infrared sensors
(photocells).
4. Counting function. (a) Flap closes after passing N pedestrians continuously by swiping
card N (N<=16) times correspondingly (b) Pedestrian count (Optional by controller software).
5.LED direction indicator that displays present pedestrian pass status. Green arrow for
en try free, and red cross for passage locked.
6. Can be expanded to automatic identification system or fare collection (card collection),
such as subway ticket, employee checking-in, access control,etc.
7. Can set always open or always close.
8. Other Optional itmes: (a)Two-color light flaps, indicating open or close status. (b) Optional
with Fujica or other logo on the transparent flap. (c) Can set up sound prompt
9. Optional Extras: (a) Gate open in the case of power failure (b)Automatic heater in the
cabinet for extreme cold weather.
Structure:
Technical Data | |
Power consumption | 50W/pc |
Housing Size | 1400*280*950mm (4.5*1*3ft) |
Housing material | 1.5--2mm, 304# stainless steel, anti-rust |
Power Supply | AC 220V or 110V |
Channel width | 500--550mm |
Transit speed | 40 persons/min |
Communication Interface | RS485 |
Input signal optional | DC12V level signal or DC12V pulse signal |
Gate open in the case of power failure | -30℃ to +70 ℃ |
Working environments | indoor,outdoor |
Relative humidity | ≤95% coagulation free |
MCBF | ≥3,000,000 cycles |
Products Photo | |
Applications | |
Packaging & Shipping | |
Company Photos |
FAQ:
1. What is your system communcation mode?
We use RS485 as the the equipment communication port.
2. Is TCP/IP can be used in the system?
Yes, you can connect your reader with TCP/IP communication. Fujica Flap barrier just need
connect wire to your reader.
3. How to connect to Fujica flap barriers with card reader/biometric reader?
Just need a relay/dry contact switch cable from the reader.
4. Does Fujica flap barrier need provide software or software SDK for develop?
No, don't need. Fujica flap barrier only need a signal from reader. Then it can be
open/closed. No need software from Fujica flap barrier. But whole access control system is
normally provided by customer or integration company.
5. Which kind of reader should be bought to match Fujica flap barrier?
Pls provide the readers' specification and size to us, then we can know it if can be
installed or connected to fujica flap barriers.